Zuberi Engineering Works | Conveyor systems, tanks and steel fabrication, Anand

Roller conveyor line running through a production hall

Conveyor systems

Eight conveyor types built to suit the material, the distance, the lift and the duty.

Belt conveyor, troughed or flat
Roller conveyor, gravity or driven
Chain and slat conveyor
Screw conveyor
Bucket elevator
Telescopic loading conveyor
Modular plastic belt
Inclined and Z-profile

Stock photograph, shown to illustrate the equipment type.

Row of stainless steel process tanks in a plant

Tanks and vessels

Storage and process tanks in mild and stainless steel, rolled, welded and tested in house.

Storage tanks, vertical or horizontal
Non-pressure process vessels
Stainless 304 and 316 tanks
Silos and hoppers
Mixing and settling tanks

Stock photograph, shown to illustrate the equipment type.

Steel portal frame structure inside an industrial building

Structural and heavy steel

Platforms, mezzanines, machine frames and skid bases, drilled and squared in the shop.

Platforms and walkways
Mezzanine floors
Machine frames and bases
Sheds, trusses and purlins
Skid bases with machined pads

Stock photograph, shown to illustrate the equipment type.

Engineers working over a technical drawing

Custom fabrication

Build to drawing, build to sample, and the one-off parts nobody stocks.

Build to drawing
Reverse engineering from a sample
Machining, turning and milling
Welding in MS, SS and aluminium
Assembly and trial run

Stock photograph, shown to illustrate the equipment type.

Three questions and we can name the conveyor

The same three questions our engineers ask on the phone. Your answers are not sent anywhere, this page is a mockup.

1.What are you moving

2.Where does it have to go

3.What is the environment

Suggested type

Answer all three and a recommendation appears here, with the reason behind it.

What are you moving
Where does it have to go
What is the environment

Where this equipment goes to work

The duty decides the build. Tell us the sector and the material and we will specify the frame, the belt and the finish to suit it.

Food and grain processingWashdown belts, screws, bucket elevators

Chemicals and pharmaStainless vessels, pickled and passivated

Cement and mineralsHeavy belt lines, chutes, hoppers

Warehousing and logisticsRoller lines, telescopic loaders

Engineering and OEMFrames, skids and batch job work

Dairy and beverageSS 304 tanks and modular belting

Enquiry to dispatch, seven steps

Step 1

Enquiry

Send a drawing, a photo or a description. We ask what we need to price it.

Step 2

Offer

Material, sizes, finish, lead time and terms, in writing.

Step 3

Drawing approval

You approve the general arrangement before we cut anything.

Step 4

Fabrication

Cutting, forming, welding and machining in our own works.

Step 5

Inspection

Dimensions and welds checked against the approved drawing.

Step 6

Finishing

Blast, primer, paint, powder coat or galvanising.

Step 7

Dispatch

Crated and marked for road transport or for the port.

Before you enquire

Yes. PDF, DWG, DXF and STEP are all fine. If you only have a sample or a photograph, we measure it and draw it ourselves, then send the drawing for your approval.

Conveyor systems, tanks and structural steel, built to your drawing.

Four ranges, twenty two build types

Conveyor systems

Tanks and vessels

Structural and heavy steel

Custom fabrication

Three questions and we can name the conveyor

Where this equipment goes to work

Enquiry to dispatch, seven steps

Enquiry

Offer

Drawing approval

Fabrication

Inspection

Finishing

Dispatch

Technical literature

Before you enquire

Send the specification, or just the problem