ZuberiRequest quote

JOB TRAVELLER / FABRICATION WORKS / SHEET 1 OF 1

Conveyors,
tanks & heavy
steel

We build the full conveyor range, tanks and vessels, structural steel and one-off job work to your drawing, in Anand, Gujarat, for Indian plants and for export. Every job carries a card like this one through cutting, welding, finishing and inspection before it is crated.

Request a quoteCall the works

Send a drawing, a photo or a description. Both routes reach the same shop.

Works

Zuberi Engineering Works

Job no.

ZEW-/0000

Scope
Conveyor · tank · structure · custom
Material
MS · SS 304 / 316 · aluminium
Build to
Your drawing, sample or sketch
Finish
Blast, primer, paint, powder, HDG
Supply
Domestic + export crating
Lead time
OWNER TO FILL — typical weeks by job type

Signed, works manager

ACCEPTEDZEW WORKS

What goes through the shop

OPERATIONS SCHEDULE · 4 GROUPS

Conveyor systems

Designed around your material, your throughput and your floor plan, then built from scratch rather than cut down from a catalogue part.

  • Belt conveyorTroughed and flat, fixed or portable
  • Roller conveyorGravity, driven and accumulating
  • Chain & slat conveyorHot, heavy or oily loads
  • Screw conveyorPowders, grain, ash, sludge
  • Bucket elevatorVertical lift, centrifugal or continuous
  • Telescopic conveyorTruck and container loading
  • Modular plastic beltWashdown and food handling
  • Inclined conveyorCleated, sidewall, Z-profile

Tanks & vessels

Storage and process tanks in mild and stainless steel, fabricated and finished to the service they sit in.

  • Storage tanksMS and SS, vertical or horizontal
  • Non-pressure vesselsProcess, mixing, settling
  • Stainless tanks304 / 316, polished or pickled
  • Silos & hoppersBolted or welded, with discharge

Structural & heavy steel

The steel that holds a plant together, cut, drilled, welded and finished square to the drawing.

  • Platforms & walkwaysGrating, handrail, toe plate
  • Mezzanine floorsColumns, beams, decking
  • Machine framesWelded and stress-relieved
  • Sheds & trussesPortal frames and purlins
  • Skid basesMachined pads, levelled

Custom job work

Send a drawing, a sample or a problem described in your own words. The detail work is quoted as part of the job.

  • Build to drawingGA, fabrication and weld detail
  • Build to sampleReverse-engineered from a part
  • MachiningTurning, milling, boring, drilling
  • WeldingMIG, TIG, arc — MS, SS, aluminium
  • Assembly & trial runBuilt up and run before dispatch

Build to your drawing

Most of what leaves here is a one-off. A chute at an odd angle. A screw 2.4 m long when the catalogue stops at 2. A frame measured off a part a customer posted us in a rice sack. We re-draw it, quote it, and hold the tolerances written on the sheet.

  • Drawings in PDF, DWG or STEP
  • Reverse engineering from a sample
  • Fit-up checked before full weld
  • Assembled and trial run before dispatch
Detail check, every job

Dimensions, squareness and weld profile are checked against the drawing and recorded on the job card before finishing.

Inspection record

OWNER TO FILL — your actual check sheet or test report

The route your job takes

EIGHT STATIONS · ENQUIRY TO DISPATCH

Each station is signed off before the job moves to the next one. Eight of them, from the drawing landing in the inbox to the crate going on the truck.

  1. 01

    Enquiry

    Drawing, sample or sketch received and read

    PASSEDINSP · ZEW
  2. 02

    Offer

    Material, sizes, finish and lead time quoted

    PASSEDINSP · ZEW
  3. 03

    Cutting

    Plate, pipe and section cut to size

    PASSEDINSP · ZEW
  4. 04

    Forming

    Bent, rolled, pressed to profile

    PASSEDINSP · ZEW
  5. 05

    Welding

    Fit-up, tack, full weld, grind

    PASSEDINSP · ZEW
  6. 06

    Finishing

    Shot blast, primer, paint or galvanising

    PASSEDINSP · ZEW
  7. 07

    Inspection

    Dimensions and weld checked against the drawing

    PASSEDINSP · ZEW
  8. 08

    Dispatch

    Crated, marked and handed to transport or export agent

    PASSEDINSP · ZEW

Material we work in

GradeNameTypical use
IS 2062Structural mild steelFrames, platforms, chassis
SS 304Austenitic stainlessFood, pharma, washdown
SS 316Molybdenum stainlessChemical and coastal service
IS 513Cold rolled sheetGuards, covers, chutes
ALU 6061Aluminium alloyLight frames and sections
HDGHot dip galvanisedOutdoor and wet duty

Finishes we apply

  • Shot blast

    SA 2.5 before primer

  • Red oxide primer

    Two coats, brush or spray

  • PU / enamel paint

    Shade to your sample

  • Powder coat

    Oven cured, RAL shade

  • Hot dip galvanising

    Outsourced, bath limits apply

  • Pickle & passivate

    Stainless weld areas

Shade, film thickness and standard to your specification. Tell us the service condition and we will advise the finish.

Open a job card

Fill what you know. A scope and a rough size is enough to start — we will come back with the questions a price actually needs.

Rather talk first?

Call the works

Number goes live once the owner supplies it.

Enquiry card

ZEW / RFQ

PDF, DWG, STEP, JPG — up to 25 MB

Demo only — no data leaves this page.

Slots waiting on real material

Nothing here was invented. These four blocks stay empty on purpose until you hand over the real thing — this panel comes off the live site once they are filled.

  • Shop floor & installed job photos

    Supply 8–12 images: machines, work in progress, finished jobs, dispatch

  • Certifications & test reports

    Add any ISO, material test or weld qualification documents you hold

  • Client names or logos

    Add only customers who have agreed to be named

  • Capacity figures

    Shop area, crane capacity, max fabricated weight, years operating

Reach the works

Working hours, somebody picks up. Outside them, send the drawing and it is read the next morning.

Phone
OWNER TO FILL
WhatsApp
OWNER TO FILL
Email
OWNER TO FILL
Works address
OWNER TO FILL

Dispatch to

Anand
Gujarat

India · domestic & export supply

OWNER TO FILL — full works address