Every part set out on a grid before a single plate is cut.
Conveyor systems, tanks and vessels, structural steel and build-to-drawing job work, fabricated in Anand, Gujarat for Indian plants and for export. Nested, cut, welded and checked against your dimensions.
The set-out grid is live. Hide it from the header when you want the page clean.
Parts nested to waste as little of the sheet as the drawing allows. The orange path is the cut.
Catalog
FOUR GROUPS · 22 BUILD TYPES
Conveyor systems
Designed around your material, your throughput and your floor plan, then built from scratch rather than cut down from a catalogue part.
Quote this- 01
Belt conveyor
Troughed and flat, fixed or portable
- 02
Roller conveyor
Gravity, driven and accumulating
- 03
Chain & slat conveyor
Hot, heavy or oily loads
- 04
Screw conveyor
Powders, grain, ash, sludge
- 05
Bucket elevator
Vertical lift, centrifugal or continuous
- 06
Telescopic conveyor
Truck and container loading
- 07
Modular plastic belt
Washdown and food handling
- 08
Inclined conveyor
Cleated, sidewall, Z-profile
Build to drawing
Send the
drawing.
Most of what leaves here is a one-off. A chute at an odd angle. A screw 2.4 m long when the catalogue stops at 2. A frame measured off a part a customer posted us in a rice sack. We re-draw it, quote it, and hold the tolerances written on the sheet.
- Formats read
- PDF · DWG · DXF · STEP
- From a sample
- Measured and re-drawn
- Fit-up
- Checked before full weld
- Before dispatch
- Assembled and trial run
- Supply
- Domestic and export crated
- Minimum order
- One piece
Set-out to dispatch
EIGHT STATIONS
- 01
Enquiry
Drawing, sample or sketch received and read
- 02
Offer
Material, sizes, finish and lead time quoted
- 03
Cutting
Plate, pipe and section cut to size
- 04
Forming
Bent, rolled, pressed to profile
- 05
Welding
Fit-up, tack, full weld, grind
- 06
Finishing
Shot blast, primer, paint or galvanising
- 07
Inspection
Dimensions and weld checked against the drawing
- 08
Dispatch
Crated, marked and handed to transport or export agent
Material
| Grade | Description | Typical use |
|---|---|---|
| IS 2062 | Structural mild steel | Frames, platforms, chassis |
| SS 304 | Austenitic stainless | Food, pharma, washdown |
| SS 316 | Molybdenum stainless | Chemical and coastal service |
| IS 513 | Cold rolled sheet | Guards, covers, chutes |
| ALU 6061 | Aluminium alloy | Light frames and sections |
| HDG | Hot dip galvanised | Outdoor and wet duty |
Finish
- Shot blastSA 2.5 before primer
- Red oxide primerTwo coats, brush or spray
- PU / enamel paintShade to your sample
- Powder coatOven cured, RAL shade
- Hot dip galvanisingOutsourced, bath limits apply
- Pickle & passivateStainless weld areas
Tell us the service condition — indoor, wet, chemical, coastal — and we will specify the finish with you.
Request
a quote
Scope and a rough size is enough to start. Attach a drawing and we can be far more precise.
Reserved cells
Left deliberately empty — no photos, certificates, client names or capacity figures have been invented. Fill these and the panel comes off.
Shop floor & installed job photos
Supply 8–12 images: machines, work in progress, finished jobs, dispatch
Certifications & test reports
Add any ISO, material test or weld qualification documents you hold
Client names or logos
Add only customers who have agreed to be named
Capacity figures
Shop area, crane capacity, max fabricated weight, years operating
Reach the works
In working hours somebody picks up. Outside them, send the drawing — it is read the next morning.
- Phone
- OWNER TO FILL
- OWNER TO FILL
- OWNER TO FILL
- Works
- OWNER TO FILL