Zuberi Engineering Works

Anand, Gujarat  ·  fabrication & export

Conveyor systems, tanks and structural steel, fabricated to your drawing in Anand, Gujarat.

Twenty two build types across four groups, all listed below

Send a drawing, a photo or a worn part. We come back with material, sizes, finish and the date it leaves the works.

We supply plants across India and crate for export.

Ask for a priceWhatsApp a photo of the partCall the works
  • You get a drawing back before we cut anything.
  • Dimensions and welds are checked against that drawing before paint.
  • If it does not fit, we take it back and fix it.

What we make

A

Conveyor systems

Designed around your material, your throughput and your floor plan, then built from scratch rather than cut down from a catalogue part.

  • Belt conveyorTroughed and flat, fixed or portable
  • Roller conveyorGravity, driven and accumulating
  • Chain & slat conveyorHot, heavy or oily loads
  • Screw conveyorPowders, grain, ash, sludge
  • Bucket elevatorVertical lift, centrifugal or continuous
  • Telescopic conveyorTruck and container loading
  • Modular plastic beltWashdown and food handling
  • Inclined conveyorCleated, sidewall, Z-profile
B

Tanks & vessels

Storage and process tanks in mild and stainless steel, fabricated and finished to the service they sit in.

  • Storage tanksMS and SS, vertical or horizontal
  • Non-pressure vesselsProcess, mixing, settling
  • Stainless tanks304 / 316, polished or pickled
  • Silos & hoppersBolted or welded, with discharge
C

Structural & heavy steel

The steel that holds a plant together, cut, drilled, welded and finished square to the drawing.

  • Platforms & walkwaysGrating, handrail, toe plate
  • Mezzanine floorsColumns, beams, decking
  • Machine framesWelded and stress-relieved
  • Sheds & trussesPortal frames and purlins
  • Skid basesMachined pads, levelled
D

Custom job work

Send a drawing, a sample or a problem described in your own words. The detail work is quoted as part of the job.

  • Build to drawingGA, fabrication and weld detail
  • Build to sampleReverse-engineered from a part
  • MachiningTurning, milling, boring, drilling
  • WeldingMIG, TIG, arc — MS, SS, aluminium
  • Assembly & trial runBuilt up and run before dispatch

Build to drawing

Most of what leaves here is a one-off. A chute at an odd angle. A screw 2.4 m long when the catalogue stops at 2. A frame measured off a part a customer posted us in a rice sack. We re-draw it, quote it, and hold the tolerances written on the sheet.

Send the drawing
Drawings we readPDF, DWG, DXF, STEP
From a sampleWe measure it and re-draw it
Fit-upChecked before full weld
Before dispatchAssembled and run
SupplyIndia and export crating
Minimum orderOne piece

Sequence of operations

  1. 01

    Enquiry

    Drawing, sample or sketch received and read

  2. 02

    Offer

    Material, sizes, finish and lead time quoted

  3. 03

    Cutting

    Plate, pipe and section cut to size

  4. 04

    Forming

    Bent, rolled, pressed to profile

  5. 05

    Welding

    Fit-up, tack, full weld, grind

  6. 06

    Finishing

    Shot blast, primer, paint or galvanising

  7. 07

    Inspection

    Dimensions and weld checked against the drawing

  8. 08

    Dispatch

    Crated, marked and handed to transport or export agent

Material

GradeDescriptionWhere it goes
IS 2062Structural mild steelFrames, platforms, chassis
SS 304Austenitic stainlessFood, pharma, washdown
SS 316Molybdenum stainlessChemical and coastal service
IS 513Cold rolled sheetGuards, covers, chutes
ALU 6061Aluminium alloyLight frames and sections
HDGHot dip galvanisedOutdoor and wet duty

Finish

  • Shot blastSA 2.5 before primer
  • Red oxide primerTwo coats, brush or spray
  • PU / enamel paintShade to your sample
  • Powder coatOven cured, RAL shade
  • Hot dip galvanisingOutsourced, bath limits apply
  • Pickle & passivateStainless weld areas

Tell us where it will sit, indoor, wet, chemical or coastal, and we will specify the coating with you.

Enquiry sheet

ZEW / RFQ

PDF, DWG, STEP, JPG — up to 25 MB

Mockup form. Nothing leaves this page.

Reach the works

Phone
Someone in the office picks up during working hours.
WhatsApp
Best for photos of the part you want copied.
Email
Best for drawings over 10 MB.
Phoneto be filled in
WhatsAppto be filled in
Emailto be filled in
Works addressto be filled in
GSTto be filled in

Blanks left for you

No photo, certificate, client name or capacity figure appears on this page, because none have been supplied. Each one stays an open blank until you hand over the real thing.

  • Shop floor & installed job photos

    Supply 8–12 images: machines, work in progress, finished jobs, dispatch

  • Certifications & test reports

    Add any ISO, material test or weld qualification documents you hold

  • Client names or logos

    Add only customers who have agreed to be named

  • Capacity figures

    Shop area, crane capacity, max fabricated weight, years operating