Anand, Gujarat

ZuberiEngineering Works

Manufacturers & Exporters

  • All types of conveyors
  • Tanks & vessels
  • Structural fabrication
  • Job work to order

Conveyor systems, tanks and structural steel, fabricated to your drawing in Anand, Gujarat.

Ask for a priceWhatsApp usCall the works

Conveyor systems

Designed around your material, your throughput and your floor plan, then built from scratch rather than cut down from a catalogue part.

  • Belt conveyorTroughed and flat, fixed or portable
  • Roller conveyorGravity, driven and accumulating
  • Chain & slat conveyorHot, heavy or oily loads
  • Screw conveyorPowders, grain, ash, sludge
  • Bucket elevatorVertical lift, centrifugal or continuous
  • Telescopic conveyorTruck and container loading
  • Modular plastic beltWashdown and food handling
  • Inclined conveyorCleated, sidewall, Z-profile

Tanks & vessels

Storage and process tanks in mild and stainless steel, fabricated and finished to the service they sit in.

  • Storage tanksMS and SS, vertical or horizontal
  • Non-pressure vesselsProcess, mixing, settling
  • Stainless tanks304 / 316, polished or pickled
  • Silos & hoppersBolted or welded, with discharge

Structural & heavy steel

The steel that holds a plant together, cut, drilled, welded and finished square to the drawing.

  • Platforms & walkwaysGrating, handrail, toe plate
  • Mezzanine floorsColumns, beams, decking
  • Machine framesWelded and stress-relieved
  • Sheds & trussesPortal frames and purlins
  • Skid basesMachined pads, levelled

Custom job work

Send a drawing, a sample or a problem described in your own words. The detail work is quoted as part of the job.

  • Build to drawingGA, fabrication and weld detail
  • Build to sampleReverse-engineered from a part
  • MachiningTurning, milling, boring, drilling
  • WeldingMIG, TIG, arc — MS, SS, aluminium
  • Assembly & trial runBuilt up and run before dispatch

Build to drawing

Most of what leaves here is a one-off. A chute at an odd angle. A screw 2.4 m long when the catalogue stops at 2. A frame measured off a part a customer posted us in a rice sack. We re-draw it, quote it, and hold the tolerances written on the sheet.

Drawings we read
PDF, DWG, DXF, STEP
From a sample
We measure it and re-draw it
Fit-up
Checked before full weld
Before dispatch
Assembled and run
Supply
India and export crating
Minimum order
One piece
Send your drawing
  • You get a drawing back before we cut anything.
  • Dimensions and welds are checked against that drawing before paint.
  • If it does not fit, we take it back and fix it.

Order of work

  1. 1

    Enquiry

    Drawing, sample or sketch received and read

  2. 2

    Offer

    Material, sizes, finish and lead time quoted

  3. 3

    Cutting

    Plate, pipe and section cut to size

  4. 4

    Forming

    Bent, rolled, pressed to profile

  5. 5

    Welding

    Fit-up, tack, full weld, grind

  6. 6

    Finishing

    Shot blast, primer, paint or galvanising

  7. 7

    Inspection

    Dimensions and weld checked against the drawing

  8. 8

    Dispatch

    Crated, marked and handed to transport or export agent

Material

  • IS 2062Structural mild steelFrames, platforms, chassis
  • SS 304Austenitic stainlessFood, pharma, washdown
  • SS 316Molybdenum stainlessChemical and coastal service
  • IS 513Cold rolled sheetGuards, covers, chutes
  • ALU 6061Aluminium alloyLight frames and sections
  • HDGHot dip galvanisedOutdoor and wet duty

Finish

  • Shot blastSA 2.5 before primer
  • Red oxide primerTwo coats, brush or spray
  • PU / enamel paintShade to your sample
  • Powder coatOven cured, RAL shade
  • Hot dip galvanisingOutsourced, bath limits apply
  • Pickle & passivateStainless weld areas

Tell us what to make

Fill what you know. A rough size and a material is enough to start.

PDF, DWG, STEP, JPG — up to 25 MB

Mockup form. Nothing leaves this page.

Reach the works

  • PhoneSomeone in the office picks up during working hours.
  • WhatsAppBest for photos of the part you want copied.
  • EmailBest for drawings over 10 MB.
Phone
not filled in yet
WhatsApp
not filled in yet
Email
not filled in yet
Works address
not filled in yet

Still to be painted in

No photo, certificate, client name or capacity figure appears anywhere on this page, because none have been supplied. Each stays an open blank until you hand over the real thing.

  • Shop floor & installed job photos

    Supply 8–12 images: machines, work in progress, finished jobs, dispatch

  • Certifications & test reports

    Add any ISO, material test or weld qualification documents you hold

  • Client names or logos

    Add only customers who have agreed to be named

  • Capacity figures

    Shop area, crane capacity, max fabricated weight, years operating